Over

120,000

Worldwide

Saturday - Sunday CLOSED

Mon - Fri 8.00 - 18.00

Call us

 

NFPA 58 Liquefied Petroleum Gas


NFPA 58 Liquefied Petroleum Gas Course NFPA 58: Liquefied Petroleum Gas Course Provides minimum safety requirements for all liquefied petroleum gas (propane) installations, from small cylinders installed at residences to large bulk storage facilities that can exceed 100,000 gallons. The code includes minimum requirements for safe handling during LP gas transfer, including operator qualifications, maximum filling quantity in containers, and pre-transfer inspections to ensure containers are fit for continued service. This course of NFPA 58 features some important changes, including: � Bulk plant and industrial plant definitions have been updated to clearly identify storage threshold at greater than 4,000 gallons water capacity. � Container appurtenance requirements have been harmonized at 4,000 and less/greater than 4,000 gallons water capacity to better reflect container usage in the field. � Container and valves often must be protected from vehicular impact. A new definition has been added along with extensive annex material to describe vehicular barrier protection. � New requirements specify which personnel must be trained and in what topics. � Requirements have been added for tank heaters and updated for vaporizers. � Requirements have been added regarding corrosion protection for some underground piping systems. NFPA 58 also covers a number of safety requirements related to: � Container construction � Piping design � Separation of containers from homes, stores, schools and other important buildings � Safe handling of liquefied petroleum gas during transfer between containers Benefits Annex A Explanatory Material Annex B Properties of LP-Gases Annex C Design, Construction, and Requalification of DOT (ICC) Cylinders Annex D Design of ASME and API-ASME Containers Annex E Pressure Relief Devices Annex F Liquid Volume Tables, Computations, and Graphs Annex G Wall Thickness of Copper Tubing Annex H Procedure for Torch Fire and Hose Stream Testing of Thermal Insulating Systems for LP-Gas Containers Annex I Container Spacing Annex J Sample Ordinance Adopting NFPA 58 Annex K Burial and Corrosion Protection for Underground and Mounded ASME Containers Annex L Suggested Methods of Checking for Leakage Annex M Informational References Index

Course Duration :- 40 Hours

KEY FEATURES

Accredited Training Partner

To teach real programming skills

Build a solid understanding

Educated Staff

Timesheets

Video Lessons

Modules / Levels

Chapter 1 Administration

1.1 Scope

1.2 Purpose (Reserved)

1.3 Application

1.4 Retroactivity

1.5 Equivalency

1.6 Units and Formulas (Reserved)

1.7 Enforcement

Chapter 2 Referenced Publications

2.1 General

2.2 NFPA Publications

2.3 Other Publications

2.4 References for Extracts in Mandatory Sections

Chapter 3 Definitions

3.1 General

3.2 NFPA Official Definitions

3.3 General Definitions

Chapter 4 General Requirements

4.1 Acceptance of Equipment and Systems

4.2 LP-Gas Odorization

4.3 Notification of Installations

4.4 Qualification of Personnel

4.5 Ammonia Contamination

4.6 Minimum Requirements

Chapter 5 LP-Gas Equipment and Appliances

5.1 Scope

5.2 Containers

5.3 Reserved

5.4 Reserved

5.5 Reserved

5.6 Reserved

5.7 Container Appurtenances and Regulators

5.8 Regulators and Regulator Vents

5.9 Piping (Including Hose), Fittings, and Valves

5.10 Reserved

5.11 Internal Valves (Reserved)

5.12 Valves Other Than Container Valves

5.13 Hydrostatic Relief Valves

5.14 Reserved

5.15 Reserved

5.16 Reserved

5.17 Equipment

5.18 Reserved

5.19 Reserved

5.20 Appliances

5.21 Vaporizers, Tank Heaters, Vaporizing Burners, and Gas–Air Mixers

5.22 Vehicle Fuel Dispensers

Chapter 6 Installation of LP-Gas Systems

6.1 Scope

6.2 Location of Containers

6.3 Container Separation Distances

6.4 Other Container Location Requirements

6.5 Location of Transfer Operations

6.6 Installation of Containers

6.7 Installation of Container Appurtenances

6.8 Regulators

6.9 Piping Systems

6.10 Remote Shutoff Actuation

6.11 Internal Valves

6.12 Emergency Shutoff Valves

6.13 Hydrostatic Relief Valve Installation

6.14 Testing New or Modified Piping Systems

6.15 Leak Check for Vapor Systems

6.16 Installation in Areas of Heavy Snowfall

6.17 Corrosion Protection

6.18 Equipment Installation

6.19 Bulk Plant and Industrial Plant LP-Gas Systems

6.20 LP-Gas Systems in Buildings or on Building Roofs or Exterior Balconies

6.21 Installation of Appliances

6.22 Vaporizer Installation

6.23 Ignition Source Control

6.24 LP-Gas Systems on Vehicles (Other Than Engine Fuel Systems)

6.25 Vehicle Fuel Dispenser and Dispensing Stations

6.26 Containers for Stationary Engines

6.27 Fire Protection

6.28 Alternate Provisions for Installation of ASME Containers

Chapter 7 LP-Gas Liquid Transfer

7.1 Scope

7.2 Operational Safety

7.3 Venting LP-Gas to Atmosphere

7.4 Quantity of LP-Gas in Containers

Chapter 8 Storage of Cylinders Awaiting Use, Resale, or Exchange

8.1 Scope

8.2 General Provisions

8.3 Storage Within Buildings

8.4 Storage Outside of Buildings

8.5 Fire Protection and Electrical Area Classification

8.6 Automated Cylinder Exchange Stations

Chapter 9 Vehicular Transportation of LP-Gas

9.1 Scope

9.2 Electrical Requirements

9.3 Transportation in Portable Containers

9.4 Transportation in Cargo Tank Vehicles

9.5 Trailers, Semitrailers, and Movable Fuel Storage Tenders, Including Farm Carts

9.6 Transportation of Stationary Containers to and from Point of Installation

9.7 Parking and Garaging Vehicles Used to Carry LP-Gas Cargo

Chapter 10 Buildings or Structures Housing LP-Gas Distribution Facilities

10.1 Scope

10.2 Separate Structures or Buildings

10.3 Attached Structures or Rooms Within Structures

Chapter 11 Engine Fuel Systems

11.1 Scope

11.2 Training

11.3 Containers

11.4 Container Appurtenances

11.5 Quantity of LP-Gas in Engine Fuel Containers

11.6 Carburetion Equipment

11.7 Piping, Hose, and Fittings

11.8 Installation of Containers and Container Appurtenances

11.9 Installation in Interior of Vehicles

11.10 Pipe and Hose Installation

11.11 Equipment Installation

11.12 Marking

11.13 Industrial (and Forklift) Trucks Powered by LP-Gas

11.14 General Provisions for Vehicles Having Engines Mounted on Them (Including Floor Maintenance Machines)

11.15 Engine Installation Other Than on Vehicles

11.16 Garaging of Vehicles

Chapter 12 Refrigerated Containers

12.1 Construction and Design of Refrigerated Containers

12.2 Marking on Refrigerated LP-Gas Containers

12.3 Container Installation

12.4 Refrigerated LP-Gas Container Instruments and Controls

12.5 Refrigerated LP-Gas Container Impoundment

12.6 Inspection and Testing of Refrigerated LP-Gas Containers and Systems

12.7 Container Siting

12.8 Relief Devices

Chapter 13 Marine Shipping and Receiving

13.1 Scope

13.2 Piers

13.3 Pipelines

13.4 Inspections Prior to Transfer

Chapter 14 Operations and Maintenance

14.1 Scope

14.2 Operating Requirements

14.3 Maintenance

Chapter 15 Pipe and Tubing Sizing Tables

15.1 Sizing Pipe and Tubing

Drop us a Query

Your Name (required)

Your Email (required)

Phone No

Your Query

What You Get

  • 24/7 e-Learning Access
  • Certified & Industry Experts Trainers
  • Assessments and Mock Tests